Electrostatic discharge.
Damage to or destruction of electrical components.
Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Antistatic work clothing and antistatic shoes (with ESD symbol).
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
81150
1.REMOVE HEADLIGHT ASSEMBLY
85967D
2.REMOVE LIGHT CONTROL LED ECU
Remove the T20 screws (1).
Pull light control LED ECU (2) out of the headlight assembly.
Disconnect the connector (1).
Remove the light control LED ECU (2).