Tools and sharp-edged components can cause scratches.
Protect working area.
Handle tools and components carefully.
1.REMOVE FRONT BUMPER ASSEMBLY
75301A
2.REMOVE FRONT BUMPER EMBLEM SUB-ASSEMBLY
When removing the front bumper emblem sub-assembly, heat the front bumper emblem sub-assembly using a heat light.
| Item | Temperature |
|---|---|
| Front Bumper Emblem Sub-assembly | 40 to 50°C (104 to 122°F) |
| *a | Heated Part |
| *b | Heat Light |
Touching heated parts for a long time may result in burns.
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Do not heat the front bumper emblem sub-assembly excessively.
Remove the 3 spring nuts (1).
|
Protective Tape |
Tape off working area (1) around front bumper emblem sub-assembly (2) with protective tape.
Using a moulding remover A, remove the front bumper emblem sub-assembly (2).
Remove the protective tape.
75431A
3.REMOVE NO. 1 BACK DOOR EMBLEM
When removing the No. 1 back door emblem, heat the No. 1 back door emblem using a heat light.
| Item | Temperature |
|---|---|
| No. 1 Back Door Emblem | 40 to 50°C (104 to 122°F) |
| *a | Heated Part |
| *b | Heat Light |
Touching heated parts for a long time may result in burns.
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Do not heat the No. 1 back door emblem excessively.
|
Protective Tape |
Tape off working area (1) around No. 1 back door emblem (2) with protective tape.
Using a moulding remover A, remove the No. 1 back door emblem (2).
Remove the protective tape.
4.REMOVE NO. 1 REAR NAME PLATE
When removing the No. 1 rear name plate, heat the No. 1 rear name plate using a heat light.
| Item | Temperature |
|---|---|
| No. 1 Rear Name Plate | 40 to 50°C (104 to 122°F) |
| *a | Heated Part |
| *b | Heat Light |
Touching heated parts for a long time may result in burns.
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Do not heat the No. 1 rear name plate excessively.
|
Protective Tape |
Tape off the working area around the No. 1 rear name plate (1) with protective tape.
Using a moulding remover A, remove the No. 1 rear name plate (1).
Remove the protective tape.
5.REMOVE NAME PLATE
When removing the name plate, heat the name plate using a heat light.
| Item | Temperature |
|---|---|
| Name Plate | 40 to 50°C (104 to 122°F) |
| *a | Heated Part |
| *b | Heat Light |
Touching heated parts for a long time may result in burns.
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Do not heat the name plate excessively.
|
Protective Tape |
Tape off the working area around the No. 1 rear name plate (1) with protective tape.
Using a moulding remover A, remove the No. 1 rear name plate (1).
Remove the protective tape.
6.REMOVE SYMBOL EMBLEM
When removing the symbol emblem, heat the symbol emblem using a heat light.
| Item | Temperature |
|---|---|
| Symbol Emblem | 40 to 50°C (104 to 122°F) |
| *a | Heated Part |
| *b | Heat Light |
Touching heated parts for a long time may result in burns.
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Do not heat the symbol emblem excessively.
|
Protective Tape |
Tape off the working area around the symbol emblem (1) with protective tape.
Using a moulding remover A, remove the symbol emblem (1).
Remove the protective tape.