Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
86160P
1.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (w/ Front No. 2 Speaker)
Attach the claws (1) to install the front No. 2 speaker assembly (2) to the front door speaker hole cover.
Attach the claws (2) to install the front No. 2 speaker assembly and front door speaker hole cover (3) to the front door trim board sub-assembly.
Attach the clamp (1).
86160
2.INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
Position the front No. 1 speaker assembly (3).
Tighten the T20 screws (2).
Connect connector (1) and lock.
67602
3.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
81230
4.INSTALL COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)