Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
55422C
1.REMOVE INSTRUMENT CLUSTER FINISH CENTER UPPER PANEL
86160L
2.REMOVE FRONT NO. 4 SPEAKER ASSEMBLY
Loosen T20 screws (1).
Lift the front No. 4 speaker assembly (2).
Unlock plug connections (1) and disconnect.
Remove the front No. 4 speaker assembly (2).
86160J
3.REMOVE FRONT NO. 3 SPEAKER ASSEMBLY
Loosen T20 screws (1).
Detach the guide (3) to remove the front No. 3 speaker assembly (2).