Home › Audio / Visual / Telematics › AUDIO / VIDEO › ASC ECU
RM3650E _56 Audio / Visual / Telematics _079983 AUDIO / VIDEO _0387985 ASC ECU A

AUDIO / VIDEO  ASC ECU  INSTALLATION  


PROCEDURE

Hide 86240 1.INSTALL STEREO COMPONENT EQUALIZER ASSEMBLY

a.
E415645

Attach the guide (4) in the holder.


b.

Install the stereo component equalizer assembly (3) with the nut (2).

Torque:
3.3 N*m (34 kgf*cm, 29 in.*lbf)


c.

Connect connector (1) and lock.


Hide 64740B 2.INSTALL DECK TRIM SIDE BOARD AND DECK SIDE TRIM COVER LH

Hide 3. PROGRAM/ENCODE THE ACTIVE SOUND DESIGN (ASD) WITH THE DIAGNOSIS SYSTEM

a.

Connect the diagnosis system to the vehicle and enter the following menus:

Vehicle information / Control unit list / ASD Active Sound Design / Call up control unit functions / Component actuation / Reset control unit


Hide 4. PROGRAM/ENCODE AUDIO SYSTEM WITH THE DIAGNOSIS SYSTEM

a.

Connect the diagnosis system to the vehicle and enter the following menus:

Vehicle information / Control unit list / ASD Active Sound Design / Call up control unit functions / Component actuation / Reset control unit