1.REMOVE REAR BUMPER ASSEMBLY
52616B
2.REMOVE ABSORBER FUNNEL LH
Detach the claws (2) to remove the absorber funnel LH (1).
52615C
3.REMOVE ABSORBER FUNNEL RH
Use the same procedure as for the LH side.
4.REMOVE BLIND SPOT MONITOR SENSOR LH
Unlock plug connection (1) and disconnect.
Detach the clips (2) to separate the wiring harness (3).
|
Remove in this Direction |
Detach the claws (1) to remove the blind spot monitor sensor LH (2) in the direction of the arrow.
5.REMOVE BLIND SPOT MONITOR SENSOR RH
Use the same procedure as for the LH side.