Home › Vehicle Interior › POWER OUTLETS (INT) › WIRELESS CHARGER ASSEMBLY
RM3650E _58 Vehicle Interior _080023 POWER OUTLETS (INT) _0388124 WIRELESS CHARGER ASSEMBLY A

POWER OUTLETS (INT)  WIRELESS CHARGER ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

Antistatic work clothing and antistatic shoes (with ESD symbol).

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure listed below is for the LHD vehicles.



PROCEDURE

Hide 58818A 1.REMOVE FRONT CONSOLE BOX COVER

Hide 861C0 2.REMOVE MOBILE WIRELESS CHARGER CRADLE ASSEMBLY

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

Antistatic work clothing and antistatic shoes (with ESD symbol).

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
B539304

Detach the guides (1) to remove the upper console cover (2).


b.
B538986

Detach the claws (2) to remove the mobile wireless charger cradle assembly (1) from the front console box cover (3).