Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
17700
2.REMOVE AIR CLEANER ASSEMBLY
17880
3.REMOVE AIR CLEANER HOSE ASSEMBLY
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Unlock the ventilation pipe sub-assembly (1) and release from the air cleaner hose assembly.
Loosen clamp (2).
Unlock and loosen clamp (3).
Feed out air cleaner hose assembly (4) and remove.
4.REMOVE COVER CAP
Perform this procedure only when reused of the air cleaner hose assembly is necessary.
Remove the cover cap (2) of the air cleaner hose assembly (1) before installation.