Home › Engine / Hybrid System › B58 (INTAKE / EXHAUST) › INLET COMPRESSOR ELBOW
RM3650E _51 Engine / Hybrid System _080024 B58 INTAKE / EXHAUST _0388147 INLET COMPRESSOR ELBOW A

B58 INTAKE / EXHAUST  INLET COMPRESSOR ELBOW  REMOVAL  


PROCEDURE

Hide 17880 1.REMOVE AIR CLEANER HOSE ASSEMBLY

Hide 12261 2.REMOVE VENTILATION HOSE

a.
A441925

Unlock and disconnect plug connections (1).


b.

Unclip the No. 2 engine wire (2) from the ventilation hose in the marked areas.


c.

Unlock the No. 2 ventilation hose and pull it off the ventilation hose.


d.
A441924

Unlock the lock (1) and disconnect the ventilation hose (2).


e.

Unlock the lock (3).


f.

Disconnect the ventilation hose (2) from the cylinder head cover sub-assembly and remove.


Hide 17274 3.REMOVE COMPRESSOR INLET ELBOW

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




a.
A442257

Loosen the T30 bolts (1).


b.

Guide out the compressor inlet elbow (2) on the turbocharger sub-assembly and remove.