Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388305 AIR FUEL RATIO SENSOR A

B48 ENGINE CONTROL  AIR FUEL RATIO SENSOR  REMOVAL  


PROCEDURE

Hide 25051 1.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

Hide 89467A 2.REMOVE WIDE RANGE AIR FUEL RATIO SENSOR

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




a.
A441804

Unfasten cable strap (1).


b.

Pull off the thermal protection (2) in the direction of the arrow from the wide range air fuel ratio sensor (3).

NOTICE:

Do not remove the thermal protection (2) from the cable of the wide range air fuel ratio sensor.



c.
A446876N02
1.885,0.771 2.021,0.177 true 2.073,0.063 2.531,0.26 0.458,0.198 10 false SST

Using SST, release and remove the wide range air fuel ratio sensor.

SST
09224-00012