Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › THROTTLE BODY
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388322 THROTTLE BODY A

B48 ENGINE CONTROL  THROTTLE BODY  INSTALLATION  


PROCEDURE

Hide 22030 1.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A441500

Replace the throttle body gasket (1).


b.
A442122

Feed in and install the throttle body with motor assembly (2).


c.

Connect and lock the connector (3).


d.

Tighten screws (arrows).

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


e.

Tighten down E10 bolt (1).

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)