Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR (for Engine)
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388321 ENGINE COOLANT TEMPERATURE SENSOR(for Engine) A

B48 ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR(for Engine)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.




NOTICE:
·

Damage to battery terminal, the safety battery terminal or the battery state sensor.

Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.

-

Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.




PROCEDURE

Hide 89422A 2.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A442225

Unlock plug connection (1) and disconnect.


b.

Using a 17 mm deep socket wrench, unscrew the engine coolant temperature sensor (2).


c.

Guide out and remove the engine coolant temperature sensor (2).