Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR (for Radiator)
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388323 ENGINE COOLANT TEMPERATURE SENSOR(for Radiator) A

B48 ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR(for Radiator)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




PROCEDURE

Hide 89422A 1.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

CAUTION:
·

Hot fluids.

Risk of scalding!

-

Conduct all work in the vehicle wearing appropriate personal protective equipment only.




NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442139

Unlock plug connection (1) and disconnect.


b.
A442140

Unlock the locks (arrows).

HINT:
·

Collect and dispose of emerging fluids.

·

Observe country-specific waste disposal regulations.




c.

Pull the engine coolant temperature sensor (1) out of the radiator assembly and remove.