Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › MASS AIR FLOW METER
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388347 MASS AIR FLOW METER A

B58 ENGINE CONTROL  MASS AIR FLOW METER  REMOVAL  


PROCEDURE

Hide 22204 1.REMOVE INTAKE MASS AIR FLOW METER SUB-ASSEMBLY

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442234

Unlock plug connection (1) and disconnect.


b.

Remove T20 screws (arrows).


c.

Remove the intake mass air flow meter sub-assembly (2).