Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › AIR PRESSURE SENSOR
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388348 AIR PRESSURE SENSOR A

B58 ENGINE CONTROL  AIR PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421R 1.INSTALL AIR PRESSURE SENSOR

a.
A442209

Replace O-ring (1) of the air pressure sensor.


b.

Insert and install the air pressure sensor.


c.

Tighten down T25 screw.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


d.
A442236

Insert the wiring harness section for the engine (2) and install.


e.

Ensure that the locks (1) engage audibly.


f.
A442235

Insert and connect the engine ventilation line (3).

HINT:

The engine ventilation line (3) must engage audibly.



g.

Connect connectors (2) and lock.

HINT:

The connector (2) must engage audibly.



h.

Connect connectors (1) and lock.

HINT:

The connector (1) must engage audibly.



Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY