Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR (for Radiator)
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388354 ENGINE COOLANT TEMPERATURE SENSOR(for Radiator) A

B58 ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR(for Radiator)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




PROCEDURE

Hide 89422A 1.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

CAUTION:
·

Hot fluids.

Risk of scalding!

-

Conduct all work in the vehicle wearing appropriate personal protective equipment only.




NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442139

Unlock plug connection (1) and disconnect.


b.
A442140

Unlock the locks (arrows), pull the engine coolant temperature sensor (1) out of the radiator and remove.

HINT:

Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.