Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR (for Engine)
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388355 ENGINE COOLANT TEMPERATURE SENSOR(for Engine) A

B58 ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR(for Engine)  INSTALLATION  


PROCEDURE

Hide 89422A 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Insert and install the engine coolant temperature sensor.


b.

Using a 17 mm deep socket wrench, tighten the engine coolant temperature sensor using the special tool 0 496 142 (11 8 850).

Torque:
13.5 N*m (138 kgf*cm, 10 ft.*lbf)


c.

Connect connectors and lock.

HINT:

The connector must engage audibly.