Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388356 ENGINE OIL TEMPERATURE SENSOR A

B58 ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89429 1.INSTALL OIL TEMPERATURE SENSOR

a.
A441836

Replace O-ring (1).


b.

Guide in and install oil temperature sensor.


c.

Tighten down T30 bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


d.

Connect connectors and lock.

HINT:

The connector must engage audibly.