Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › VACUUM SENSOR
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388360 VACUUM SENSOR A

B58 ENGINE CONTROL  VACUUM SENSOR  INSTALLATION  


PROCEDURE

Hide 89420 1.INSTALL VACUUM SENSOR ASSEMBLY

a.
A442209

Check the O-ring for damage and replace where required.


b.

Apply a thin coat of lubricant to the O-ring (1).


c.

Install the vacuum sensor assembly.


d.

Tighten down T25 bolt.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


e.

Connect connectors and lock.


Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY