Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
2.REMOVE AIR CLEANER CAP SUB-ASSEMBLY
89467A
3.REMOVE WIDE RANGE AIR FUEL RATIO SENSOR
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Unlock plug connection (1) and disconnect.
Unlock the lock on the connector (1) with a suitable screwdriver (2).
Remove connector (1).
Detach the line of the wide range air fuel ratio sensor (2) from the holder (1).
Using SST, remove the wide range air fuel ratio sensor (1).