Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
2.REMOVE AIR CLEANER CAP SUB-ASSEMBLY
89465
3.REMOVE OXYGEN SENSOR
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Unlock plug connection (1) and disconnect.
Unlock the lock on the connector (1) with a suitable screwdriver (2).
Remove connector (1).
Detach the line of the oxygen sensor (2) from the holder (1).
Using SST, remove the oxygen sensor (1).