Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
17880
1.REMOVE AIR CLEANER HOSE ASSEMBLY
51219
2.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR
3.DRAIN ENGINE COOLANT (for High Temperature)
16028
4.REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Loosen T30 bolts (1) and (3).
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Pull off the No. 1 turbo water pipe sub-assembly (2) for the turbocharger sub-assembly, lay to one side and secure.
Pull off and remove the No. 2 turbo water pipe sub-assembly (4) for the turbocharger sub-assembly.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Unlock lock (1), pull off and remove the No. 2 turbo water pipe sub-assembly (2) for the turbocharger sub-assembly from the auxiliary coolant pump (3).