23802B
1.INSTALL NO. 2 FUEL PIPE SUB-ASSEMBLY
Guide the No. 2 fuel pipe sub-assembly (4) in and install.
Insert the No. 2 fuel pipe sub-assembly (4) into the holder (3).
Tighten the union nut (2) with the 17 mm union nut wrench.
Connect connectors (1) and lock.
The connector (1) must engage audibly.
Slide the fuel line (2) on and lock.
The fuel feed line must engage audibly.
Make sure the snap fastener (1) engages correctly.
Tighten down screw (3).
12602D
2.INSTALL NO. 2 ENGINE COVER SUB-ASSEMBLY