Home › Engine / Hybrid System › B48 (COOLING) › ELECTRIC WATER PUMP (for Heater)
RM3650E _51 Engine / Hybrid System _080127 B48 COOLING _0388693 ELECTRIC WATER PUMP(for Heater) A

B48 COOLING  ELECTRIC WATER PUMP(for Heater)  REMOVAL  


PROCEDURE

Hide 51219 1.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR

Hide 16109 2.REMOVE WATER PUMP SUB-ASSEMBLY

CAUTION:
·

Hot fluids.

Risk of scalding!

-

Conduct all work in the vehicle wearing appropriate personal protective equipment only.




NOTICE:
·

Damage to wires when disconnecting connectors and plug connections.

Sheared wires can cause a short circuit.

-

Do not pull on the wires when disconnecting connectors and plug connections.




a.
A433991

Disconnect the coolant lines with the special tool.

SST
09900-WA090  


b.
A442294

Loosen radiator reserve tank cap sub-assembly (1).


c.
A442308

Unlock and release No. 7 water by-pass hose and No. 6 radiator hose (1).


d.

Catch and dispose of escaping coolant.


e.

Unlock and loosen connector (2).


f.

Unscrew the nut (3) on the No. 3 water pump bracket sub-assembly.


g.

Guide out and remove the water pump sub-assembly (4).