Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
17882
1.REMOVE NO. 2 AIR CLEANER HOSE
51219
2.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR
3. DRAIN ENGINE COOLANT (for High Temperature)
4.DISCONNECT COOLANT HOSE
Loosen T30 bolts (2).
Remove the No. 2 water by-pass hose (1) and tie it to the side.
Unlock retaining clip (3).
Remove No. 1 radiator hose (4).
16321
5.REMOVE WATER INLET
Loosen T30 bolt (1).
Pull off and remove the water inlet (2).