12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
17882
2.REMOVE NO. 2 AIR CLEANER HOSE
3.REMOVE FAN AND GENERATOR V BELT
Component with preload.
Danger of injury!
Reduce preload as far as possible before disassembly. Relieve component.
If the fan and generator V belt for the alternator is reused: Mark the direction of travel and reinstall the fan and generator V belt for the alternator in same direction of travel.
| *a | 4 mm Hexagon Wrench |
Using 16 mm socket wrench, increase the preload on the belt tensioner in the direction of arrow.
Secure the belt tensioner with the 4 mm hexagon wrench.
Remove the fan and generator V belt for the alternator (1).