Home › Engine / Hybrid System › B48 (ENGINE MECHANICAL) › V-RIBBED BELT TENSIONER
RM3650E _51 Engine / Hybrid System _080178 B48 ENGINE MECHANICAL _0388881 V-RIBBED BELT TENSIONER A

B48 ENGINE MECHANICAL  V-RIBBED BELT TENSIONER  INSTALLATION  


PROCEDURE

Hide 16620D 1.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

CAUTION:
·

Component with preload.

Danger of injury!

-

Reduce preload as far as possible before disassembly. Relieve component.




a.
A444972C01
1.906,1.917 2.563,1.906 false 2.604,1.813 2.917,2.01 0.313,0.198 10 false *a
*a 4 mm Hexagon Wrench


Guide in and install v-ribbed belt tensioner assembly (1).


b.

Tighten bolts (arrows).

Torque:
28 N*m (286 kgf*cm, 21 ft.*lbf)


c.

Make sure that the 4 mm hexagon wrench is fitted correctly.


Hide 27020 2.INSTALL GENERATOR ASSEMBLY