Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).
Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.
Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.
13501A
1.REMOVE INTAKE CAMSHAFT SUB-ASSEMBLY
13053
2.REMOVE NO. 3 CAMSHAFT SUB-ASSEMBLY
Loosen T30 bolts (1).
Guide out the bearing caps.
Loosen T30 bolts (2).
Guide out the bearing caps.
All the bearing caps must be installed again in the same position with the engine running.
Remove No. 3 camshaft sub-assembly (1) in direction of arrow.