Home › Engine / Hybrid System › B48 (ENGINE MECHANICAL) › CAMSHAFT TIMING GEAR
RM3650E _51 Engine / Hybrid System _080178 B48 ENGINE MECHANICAL _0388864 CAMSHAFT TIMING GEAR A

B48 ENGINE MECHANICAL  CAMSHAFT TIMING GEAR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).

Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.

-

Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.




PROCEDURE

Hide 135A0A 1.REMOVE EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY

Hide 13050 2.REMOVE CAMSHAFT TIMING GEAR ASSEMBLY

a.
A441618

Remove the camshaft timing gear assembly (1) from the intake camshaft sub-assembly in the direction of the arrow and guide it out from the chain sub-assembly toward the rear.


Hide 13070A 3.REMOVE CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY

a.
A441619

Remove the camshaft timing exhaust gear assembly (1) from the exhaust camshaft sub-assembly in the direction of arrow and feed it out from the chain sub-assembly toward the rear.