13506
1.INSTALL CHAIN SUB-ASSEMBLY
Contaminant or foreign body.
Contamination can result in malfunctions, operating failure or leaks.
Adhere to the utmost cleanliness.
Protect components from contamination e.g. by covering.
Close off line connections with seal plugs.
Pull chain sub-assembly (1) in on the crankshaft (2) and install.
Replace bearing journal (4).
Insert and install the chain tensioner slipper (1) on the bearing journal (2).
Insert and install the No. 1 chain vibration damper (3).
Using a T45 "TORX" socket wrench, tighten the bearing journals (4).
Clean screw thread.
11321
2.INSTALL TIMING GEAR CASE