Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › V-RIBBED BELT TENSIONER
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388885 V-RIBBED BELT TENSIONER A

B58 ENGINE MECHANICAL  V-RIBBED BELT TENSIONER  REMOVAL  


PROCEDURE

Hide 1.REMOVE FAN AND GENERATOR V BELT

Hide 16020 2.SEPARATE ELECTRIC WATER PUMP ASSEMBLY

Hide 17882 3.REMOVE NO. 2 AIR CLEANER HOSE

Hide 16620D 4.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

CAUTION:
·

Component with preload.

Danger of injury!

-

Reduce preload as far as possible before disassembly. Relieve component.




a.
A444970C01
2.073,1.969 2.792,1.552 true 2.802,1.438 3.052,1.635 0.25,0.198 10 true *a
*a 4 mm Hexagon Wrench


Increase the preload of the v-ribbed belt tensioner assembly of the generator assembly on the hexagon head (1).


b.

Remove 4 mm hexagon wrench.


c.
A441237

Loosen bolts (1).


d.

Remove the v-ribbed belt tensioner assembly (2) of the generator assembly.