Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › ROCKER ARM
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388887 ROCKER ARM A

B58 ENGINE MECHANICAL  ROCKER ARM  INSTALLATION  


PROCEDURE

Hide 13801 1.INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

a.
A441635

Observe the classification of the No. 1 valve rocker arm sub-assembly.

i.

The classification from 1 to 5 is printed on the respective No. 1 valve rocker arm sub-assembly.

Classification Idle speed
1 Repair case - slow engine speed when idling
2 Installed as standard/initial installation
3 Installed as standard/initial installation
4 Installed as standard/initial installation
5 Repair case - high engine speed when idling



b.
A441634

Install the No. 1 valve rocker arm sub-assemblies (1) on the intake side.


c.

Make sure the No. 1 valve rocker arm sub-assemblies are correctly positioned on the valve lash adjuster clearance compensating elements (arrows) and on the intake valves.


d.
A441634

Install the No. 1 valve rocker arm sub-assemblies (1) on the exhaust side.


e.

Make sure the No. 1 valve rocker arm sub-assemblies are correctly positioned on the valve lash adjuster clearance compensating elements (arrows) and on the exhaust valves.