Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › CAMSHAFT TIMING GEAR
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388888 CAMSHAFT TIMING GEAR A

B58 ENGINE MECHANICAL  CAMSHAFT TIMING GEAR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.



·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.

-

For an auxiliary battery: Disconnect battery earth lead of auxiliary battery.




NOTICE:
·

Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).

Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.

-

Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.




PROCEDURE

Hide 135A0A 1.REMOVE CAMSHAFT TIMING GEAR BOLT ASSEMBLY

Hide 13050 2.REMOVE CAMSHAFT TIMING GEAR ASSEMBLY

HINT:

The figure shows the rear side of the engine.


a.
A442024

Guide out the camshaft timing gear assembly (1) from the chain sub-assembly (2) and remove.


Hide 13070A 3.REMOVE CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY

HINT:

The figure shows the rear side of the engine.


a.
A442026

Guide out the camshaft timing exhaust gear assembly (1) from the chain sub-assembly (2) and remove.