Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › TIMING CHAIN
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388889 TIMING CHAIN A

B58 ENGINE MECHANICAL  TIMING CHAIN  INSTALLATION  


PROCEDURE

Hide 13506 1.INSTALL CHAIN SUB-ASSEMBLY

NOTICE:
·

Contaminant or foreign body.

Contamination can result in malfunctions, operating failure or leaks.

-

Adhere to the utmost cleanliness.

-

Protect components from contamination e.g. by covering.

-

Close off line connections with seal plugs.




a.
A442089

Pull chain sub-assembly (1) in on the crankshaft (2) and install.


b.
A442088

Replace bearing journal (1).


c.

Insert and position the No. 1 chain vibration damper (2).

HINT:

Clean bolt thread.



d.

Using a T45 "TORX" socket wrench, tighten the bearing journals (1).

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


e.
A442087

Insert and install the chain tensioner slipper (1) on the bearing journal (2).