Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › VALVE STEM OIL SEAL
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388903 VALVE STEM OIL SEAL A

B58 ENGINE MECHANICAL  VALVE STEM OIL SEAL  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.



·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.

-

For an auxiliary battery: Disconnect battery earth lead of auxiliary battery.




NOTICE:
·

Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).

Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.

-

Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.




PROCEDURE

Hide 13711E 2.REMOVE VALVE STEM OIL SEAL

NOTICE:
·

Contaminant or foreign body.

Contamination can result in malfunctions, operating failure or leaks.

-

Adhere to the utmost cleanliness.

-

Protect components from contamination e.g. by covering.

-

Close off line connections with seal plugs.




HINT:

The description is for one component only. The procedure is identical for all further components.


a.
A441337

Remove the valve stem oil seal (1) using the special tool 0 490 796 (11 1 480).

SST
09200-WA450