Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Working on 12 V vehicle electrical system.
Risk of short circuits! Risk of fire!
Detach battery earth lead from battery.
For an auxiliary battery: Disconnect battery earth lead of auxiliary battery.
Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).
Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.
Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.
13501A
1.REMOVE INTAKE CAMSHAFT SUB-ASSEMBLY
13053
2.REMOVE NO. 3 CAMSHAFT SUB-ASSEMBLY
Contaminant or foreign body.
Contamination can result in malfunctions, operating failure or leaks.
Adhere to the utmost cleanliness.
Protect components from contamination e.g. by covering.
Close off line connections with seal plugs.
Loosen T30 bolts (1).
Remove bearing cap (2).
Loosen T30 bolts (1).
Remove all bearing caps.
Guide out the No. 3 camshaft sub-assembly (1) toward the top and remove it.