Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL MOUNT CUSHION
RM3650E _52 Drivetrain _080261 AXLE AND DIFFERENTIAL _0389258 DIFFERENTIAL MOUNT CUSHION A

AXLE AND DIFFERENTIAL  DIFFERENTIAL MOUNT CUSHION  REMOVAL  


PROCEDURE

Hide 51206A 1.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

Hide 41651A 2.REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION

HINT:

Use the same procedure for the opposite side.


a.
C419707

Pull rear No. 2 differential mount cushion out from the rear suspension member sub-assembly using special tools (2 464 360, 2 220 325 (33 0 181), 0 494 981 (33 4 465) and 0 494 982 (33 4 466)) and remove.

SST
09500-WA150  
09500-WA280  
09500-WA300  

HINT:

Ensure that the special tool (2 220 325 (33 0 181) is correctly positioned on the rear suspension member sub-assembly.



Hide 3.REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

a.
C419716

Before removal it is essential to measure the protrusion (A) of the rear No. 1 differential mount cushion on the rear suspension member sub-assembly.

HINT:

Respect direction of travel (F).



b.
C419717

Pull the rear No. 1 differential mount cushion (1) out of the rear suspension member sub-assembly using special tools (0 496 507 (33 0 031), 0 496 508 (33 0 032), 0 496 511 (33 0 035) and 0 496 512 (33 0 036)) remove.

SST
09500-WA310  

HINT:

Respect direction of travel (F).