Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › SEAT POSITION SENSOR
RM3650E _58 Vehicle Interior _079907 SUPPLEMENTAL RESTRAINT SYSTEMS _0390130 SEAT POSITION SENSOR A

SUPPLEMENTAL RESTRAINT SYSTEMS  SEAT POSITION SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL SEAT POSITION AIRBAG SENSOR (for Manual Seat)

a.
B538798

Install the No. 2 seat position airbag sensor (2) to the front seat adjuster assembly (3) from above and position it correctly.


b.

Tighten the bolt (1).

Torque:
1.3 N*m (13 kgf*cm, 12 in.*lbf)


c.
B538777

Attach the clamps (1).


d.
B538803

Install the connectors correctly into the connector housing (3) in the sequence (1) to (2) in the direction of the arrow.


e.
B541874

Attach the claws (4) to install the connector (1) to the connector housing (2).


f.

Fasten cable (3) with the tie band to connector housing (2).


Hide 2.INSTALL SEAT POSITION AIRBAG SENSOR (for Power Seat)

a.
B538801

Install the seat position airbag sensor (2) to the front seat adjuster assembly (3) from above and position it correctly.


b.

Tighten the bolt (1).

Torque:
1.3 N*m (13 kgf*cm, 12 in.*lbf)


c.

Attach the clamp.


d.
B538804

Install the connectors correctly into the connector housing (3) in the sequence (1) to (2) in the direction of the arrow.


e.
B538805

Attach the claws (4) to install the connector (1) to the connector housing (2).


f.

Fasten cable (3) with the tie band to connector housing (2).