Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
51219
1.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR
2.SEPARATE OIL COOLER TUBE
Loosen T25 screws (1).
Remove upper holders.
Detach oil cooler tubes (2) from the holders, set aside and secure.
44771P
3.INSTALL BOOSTER AIR VALVE
Contaminant or foreign body.
Contamination can result in malfunctions, operating failure or leaks.
malfunctions, operating failure or leaks.
Protect components from contamination e.g. by covering.
Close off line connections with seal plugs.
Unscrew the E8 bolt (1) and set the holder aside.
Unlock and disconnect plug connection (2).
Unlock and pull off the No. 1 hose to hose tube (3).
Loosen E10 bolt (1).
Remove the booster air valve (2).