44771P
1.INSTALL BOOSTER AIR VALVE
Check the O-ring (1) for damage and replace the booster air valve as needed.
Clean sealing surface.
Damage to the surface.
The use of metal-cutting tools (e.g. emery cloth) to clean the surfaces can damage them and lead to leaks or engine damage.
Do not use any metal-cutting tools.
Install the booster air valve.
Tighten down E10 bolt.
Connect and lock the No. 1 hose to hose tube.
Make sure that the connections are locked correctly. The locks must engage audibly.
Connect and lock the connector.
Make sure that the connections are locked correctly. The locks must engage audibly.
Position the holder and tighten the E8 bolt.
2.INSTALL OIL COOLER TUBE
Position oil cooler tubes in the holders.
Install upper holders.
Tighten the T25 screws.
51219
3.INSTALL FRONT SUSPENSION MEMBER LOWER PROTECTOR