17201
1.REMOVE TURBOCHARGER SUB-ASSEMBLY
16027
2.REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Loosen T30 bolts (1).
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Remove the No. 1 turbo water pipe sub-assembly (2).
11271C
3.REMOVE CYLIVDER BLOCK SIDE COVER
Loosen clip (1).
Remove the cylivder block side cover (2).
12203
4.REMOVE VENTILATION PIPE SUB-ASSEMBLY
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Loosen T30 bolt (1).
Remove ventilation pipe sub-assembly (2).