Home › Engine / Hybrid System › B48 (EMISSION CONTROL) › FUEL EMISSION TUBE (for Rear)
RM3650E _51 Engine / Hybrid System _080100 B48 EMISSION CONTROL _0394158 FUEL EMISSION TUBE(for Rear) A

B48 EMISSION CONTROL  FUEL EMISSION TUBE(for Rear)  INSTALLATION  


PROCEDURE

Hide 77254 1.INSTALL NO. 1 FUEL EMISSION TUBE

NOTICE:

Schematic diagram is for example purposes. Some parts may differ in certain details.


a.
A446791

Feed in No. 1 fuel emission tube and clip it onto the holder.


b.

Position snap fastener and lock.


c.
A446790

Clip the purge air line into the holder.


d.

Position snap fastener and lock.


Hide 51206A 2.INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY