77254
1.INSTALL NO. 1 FUEL EMISSION TUBE (for Type B)
Schematic diagram is for example purposes. Some parts may differ in certain details.
Feed in No. 2 fuel emission tube and clip it onto the holder.
Position snap fastener and lock.
Connect and lock connector (on the active carbon filter).
Clip the purge air line into the holder.
Position snap fastener and lock.
77254
2.INSTALL NO. 1 FUEL EMISSION TUBE (for Type A)
Feed in No. 2 fuel emission tube and clip it onto the holder.
Position snap fastener and lock.
Clip the purge air line into the holder.
Position snap fastener and lock.
51206A
3.INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY