Home › Engine / Hybrid System › B58 (LUBRICATION) › OIL PRESSURE CONTROL VALVE
RM3650E _51 Engine / Hybrid System _080066 B58 LUBRICATION _0394474 OIL PRESSURE CONTROL VALVE A

B58 LUBRICATION  OIL PRESSURE CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 15250 1.INSTALL OIL PRESSURE CONTROL VALVE ASSEMBLY

a.
A441335

Check the O-ring (1) for damage and replace the oil pressure control valve assembly as needed.


b.

Install the oil pressure control valve assembly.


c.

Tighten down T30 bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


d.

Connect and lock the connector.


Hide 3.INSPECT FOR ENGINE OIL LEAK