Home › Engine / Hybrid System › B48 (EMISSION CONTROL) › VENTILATION HOSE
RM3650E _51 Engine / Hybrid System _080100 B48 EMISSION CONTROL _0401026 VENTILATION HOSE A

B48 EMISSION CONTROL  VENTILATION HOSE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




PROCEDURE

Hide 12601B 1.REMOVE NO.1 ENGINE COVER SUB-ASSEMBLY

Hide 12261 3.REMOVE VENTILATION HOSE

a.
A441755

Unlock connector (1) and pull off.


b.

Unlock the lock (2) of the ventilation hose (3) and disconnect the ventilation hose (3) from the cylinder head cover sub-assembly.


c.

Unlock the locks (arrows) and disconnect the ventilation hose (3) from the clean air pipe to the top.