Home › Engine / Hybrid System › B48 (EMISSION CONTROL) › VENTILATION HOSE
RM3650E _51 Engine / Hybrid System _080100 B48 EMISSION CONTROL _0401026 VENTILATION HOSE A

B48 EMISSION CONTROL  VENTILATION HOSE  INSTALLATION  


PROCEDURE

Hide 12261 1.INSTALL VENTILATION HOSE

HINT:

Make sure that the connections are locked correctly. The locks must engage audibly.


a.
A441755

Connect the ventilation hose (3) to the clean air pipe.

HINT:

The locks (arrows) must engage audibly.



b.

Connect connector (1).


c.

Connect the ventilation hose (3) to the cylinder head cover sub-assembly.

HINT:

The lock (2) must audibly engage.



Hide 12601B 3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY