Description is for left component only. Procedure on the right side is identical.
55878B
1.REMOVE COWL VENT COVER LH
55877B
2.REMOVE COWL VENT COVER RH
53450A
3.REMOVE HOOD SUPPORT ASSEMBLY
Shutting hood sub-assembly or back door panel sub-assembly.
Danger of injury!
Support hood sub-assembly / back door panel sub-assembly in fully open position with the aid of a suitable device.
Lift the clamp (1) with a screwdriver slightly in the direction of arrow.
Pull ball sockets off from ball studs and remove the hood support assembly (2).