Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
| *A | for 2 Port Type |
| *B | for 6 Port Type |
Check the shape of the Turbo Charger SUB-ASSY before doing removal/installation work.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
17201
1.REMOVE TURBOCHARGER SUB-ASSEMBLY
16028
2.REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY (for 2 Port Type)
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Collect and dispose of emerging fluids. Observe country specific waste disposal regulations.
Loosen the T30 bolt (1).
Disconnect the No. 2 turbo water pipe sub-assembly (2).
16028
3.REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY (for 6 Port Type)
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Collect and dispose of emerging fluids. Observe country specific waste disposal regulations.
Loosen the screw (1).
Remove the No. 2 turbo water pipe sub-assembly (2).