16028
1.INSTALL NO. 2 TURBO WATER PIPE SUB-ASSEMBLY (for 2 Port Type)
Replace the O-ring (1).
Position the No. 2 turbo water pipe sub-assembly.
Tighten down the T30 bolt.
16028
2.INSTALL NO. 2 TURBO WATER PIPE SUB-ASSEMBLY (for 6 Port Type)
Replace the O-ring (1).
Check the sealing ring (2) on the coolant return line (3) for damage and if required, renew the coolant return line (3).
Position the No. 2 turbo water pipe sub-assembly (2).
Tighten down the screw.
17201
3.INSTALL TURBOCHARGER SUB-ASSEMBLY