CRUISE CONTROL SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
| CHECK DLC3 |
![]() |
The ECM uses ISO 9141-2 for data communication. The terminal arrangement of the DLC3 complies with SAE J1962 and matches the ISO 9141-2 format.
| Terminal No. | Tester connection | Condition | Specification |
| 4 | Chassis ground - Body Ground | Always | Below 1 Ω |
| 16 | Battery positive - Body Ground | Always | 9 to 14 V |
| CHECK INDICATOR |
![]() |
Turn the ignition switch to the ON position.
Check that the CRUISE MAIN indicator light comes on when the cruise control main switch ON-OFF button is pushed on, and that the indicator light goes off when the ON-OFF button is pushed off.
![]() |